| The Turbojet 2012V-B is a compact workhorse for residential and light commercial duct cleaning. Its hard to believe an 18 wide cabinet can provide 2700 CFM at 5 static pressure, a full-size 12 Inlet, 3-stage HEPA filtration, soft start and will run at 13 or 17 amps and has a 3 year warranty. This is performance that is found in units twice its size and weight. The 2012V-Bs legendary performance and size has been proven aboard ships, offshore drilling rigs, as well as mobile homes and 6,000 room hotels, and yet it is perfect for one-person operation out of a van, trailer or box truck. Model 2012V-B uses the same ESP speed control found in the Turbojets 4200A. The power inverter converts 115-volt single-phase household power to 3-phase 220-volt power. This eliminates the start-up power surge required by a single speed motor. The 2012V-B has an optional Exhaust Flange Kit to exhaust air through a 12 light duty mylar hose outside the work area. This means it can be used as an air scrubber and place the building or room under negative pressure during remediation, or the HEPA can be removed to increase CFM or prevent it from becoming contaminated with smoke odors from a fire damage remediation job. FEATURES
Truly portable at 140 lbs. and only 19.5"w x 29"d x 55"h.
One-person operation, in and out of service vehicle and up and down stairs.
2012V-B, 2 speed soft start 1.5 HP motor w/ 3 phase inverter and direct drive backward incline blower assembly.
Filtration includes 1st stage 18 x 24 x 6 pleated bag filter, 2nd stage 18x24x1 permanent electrostatic filter and 3rd stage 18x24x6 certified HEPA filter, providing efficient filtration with maximum air flow even when dirty.
12 Inch diameter inlet pulls 5 inches of w.c. static pressure, and 2700 CFM air flow (independently tested by an AMCA certified lab with all filters installed).
12" rear, non-marking dolly wheels, 3" swivel non marking casters up front.
Steel reinforced aluminum construction and powder-coated for a professional looking, non-marking finish.
Completely field tested by Air-Care, in our service operation.
Purchase includes 3-year limited warranty.
 | 
Easy one person loading into your service vehicle | | Turbojet 2012V-B Replacement Filters | Item# | | 18"x24x6" 1st stage pleated bag filter | F1961A | | 18"x24"x1" 2nd stage Electrostatic filter | F1824 | | 18"x24"x6" energy saver HEPA | F1952 | | Turbojet 2012V-B Accessories | | | 12 dia. Pogo Pole hose adapter | CE1630 | | 12 dia. Hose adapter plate for floor registers | CE1513B | | 12x12 1/2' light duty mylar hose assembly Includes: 12"x12 1/2' hoses (2), hose clamps (4), hose coupler (1) | CE1339A | | 12x25 light duty mylar hose with clamps | CE1340A | | 12"x12"x12" Plenum Adapter | CE2299 | | Pellon, moisture barrier pre-filter, 12/pkg | F1682 | | Exhaust Flange Kit | CE1434 | | Foam Register Plugs, 14 pcs/pkg: 12"x12" (4), 8"x20" (4), 8" x 8" (6) | CE1695 | | Specifications | Turbojet 2012V | | Size | 19.5" W x 29" D x 55" H | | Weight | 140 lbs. | | Power Required | 115 V AC, 60Hz, 13 to17 amps | | Power Connection | One, 3-wire inlet w/ dual 20 amp breaker | | Power Cord | One 12 gauge x 50 ft power cord | | Air Flow | 3000 CFM free air/ 2700 CFM filtered | | Static Pressure | 5.0 inches W.G. | | Attachment | 12x12 1/2' light duty mylar hose assembly Includes: 12"x12 1/2' hoses (2), hose clamps (4), hose coupler (1) | | Exhaust | Exhaust Flange Kit (Optional) | | Filtration | 4 stages when pre-filter used | | Pre-Filter | Pellon moisture barrier | | First Stage | 18" x 24" x 6" pleated bag filter | | Second Stage | 18x24x1, 94% Electrostatic | | Third Stage | 18x24x6 certified HEPA | | Operating Range | 25 to 125 deg. F (-4 to 50 deg. C) | | Construction | Aluminum reinforced w/steel | | Control Panel | Single plug-able panel with all gauges,
indicators, switches & meters | | Blower | One backward inclined | | Motor & Inverter | 1.5 HP 3 phase /single phase to 3 phase w/ soft start and 2 speeds | | Warranty | 3 years | | |
